TRW Board

Consejo TRW Consejos Trimble RealWorks Consejos TRW Software Trimble RealWorks Trimble RealWorks

Consejo TRW N°29 | Control de avance de espacios subterráneos

June 16, 2022

TRW Tip #29 | Underground Space Advancement Control

TRW's inspection tool compares point clouds captured on different dates and using the same coordinate system.

Consejo GEOCOM Consejo TRW Consejos GEOCOM Consejos Trimble RealWorks Consejos TRW Software Trimble Trimble RealWorks Trimble X7

Consejo TRW N°28 | Anotaciones de inspección 3D

May 25, 2022

TRW Tip No. 28 | 3D Inspection Annotations

This tool allows for the addition of more information to generated 3D inspections, which can identify specific areas or points based on an annotation.

Consejos GEOCOM Consejos Trimble RealWorks GEOCOM Nube de puntos procesamiento de nube de puntos Software Trimble RealWorks Trimble Trimble RealWorks

Consejo TRW N°26 | Creación y edición de mallas

May 5, 2022

TRW Tip #26 | Mesh creation and editing

The new options in the mesh creation and editing tool allow for optimizing the calculation process of complex surfaces, such as cavity surfaces.

Consejos Trimble RealWorks Escáner Láser Trimble X7 GEOCOM Software Trimble RealWorks Trimble Trimble RealWorks Trimble X7 X7

Consejo TRW N°25 | Modelamiento de Tuberías

April 21, 2022

TRW Tip #25 | Pipe Modeling

The new modeling tool in TRW PERFORMANCE module allows pipe modeling without the need to segment or clear the work area.

Consejo GEOCOM Consejo TRW Consejos TRW GEOCOM Modelo 3D Modelos IFC Trimble Trimble RealWorks

Consejo TRW N°24 | Análisis de verticalidad y redondez de estanques

June 25, 2020

TRW Tip #24 | Verticality and roundness analysis of tanks

Analyzing the structural components of a pond measured with LIDAR technology is one of the virtues of Trimble Realworks software, which includes a specific module for this type of analysis.

Consejo GEOCOM Consejo TRW GEOCOM Modelado 3D Plantas industriales Trimble Trimble RealWorks TRW

Consejo N°23 | Modelado 3D asistido para accesoss

June 11, 2020

TRW Tip #23 | ASSISTED 3D MODELING FOR ACCESSES

This TRW tip shows the tools available in TRW to optimize the process of modeling scales and stairs. These will be very helpful when generating As-Built Drawings.

Consejo GEOCOM Consejo TRW Consejos GEOCOM Consejos Trimble RealWorks GEOCOM Modelado 3D Plantas industriales Trimble RealWorks

Consejo TRW N°22 | Modelado 3D asistido para plantas industriales

May 28, 2020

TRW Tip #22 | Assisted 3D Modeling for Industrial Plants

Performing updated measurements in industrial plants, due to the lack of blueprints, is one of the most requested jobs in the industry. LIDAR, along with TRW, is a great contribution to productivity, accuracy, and safety in delivering results. In this tip, we will review two tools that will optimize 3D modeling processes.

Consejos GEOCOM Consejos TRW GEOCOM Modelado 3D Trimble Trimble RealWorks TRW

Consejo TRW N°21 | "Herramientas de Modelado 3D, para aplicaciones de Ingeniería"

May 14, 2020

TRW Tip #21 | 3D Modeling Tools for Engineering Applications

Representing the reality environment based on known geometries is one of the foundations of 3D model generation, which helps us analyze and make decisions from the information obtained with LIDAR technology.

Consejo TRW Consejos GEOCOM Trimble Trimble RealWorks

Consejo TRW N°20 | APLICACIONES EN BIM Y CONSTRUCCIÓN, PLANICIDAD Y VERTICALIDAD DE MUROS

April 30, 2020

TRW Tip #20 | Applications in BIM and Construction: Wall Flatness and Verticality

To obtain progress control, associated with a BIM system, the generation of As-built drawings and BIM models is essential. Trimble RealWorks allows for quality control in floor flatness and wall verticality.

Consejos GEOCOM Consejos TRW GEOCOM trimble Trimble Realworks TRW

Consejo TRW N°19 | Aplicaciones en BIM y construcción, planicidad de piso

April 16, 2020

TRW Tip #19 | Applications in BIM and construction, floor flatness

One of the most important production processes in BIM work environments is the comparative analysis between design and reality; this is one of the possibilities that LIDAR technology offers us.

Consejos GEOCOM Consejos TRW GEOCOM Soporte Escáner Trimble Trimble RealWorks

Consejo TRW N°18 | Detección de Interferencia

April 2, 2020

TRW Tip #18 | Interference Detection

Clash detection is one of the most relevant tasks in BIM coordination. It involves analyzing the correct placement of an object within an already implemented space and observing its interaction with the surroundings to determine where clashes occur.

Consejo TRW Consejos GEOCOM GEOCOM Trimble Trimble RealWorks

Consejo TRW N° 17 | INSPECCIÓN ESPESOR SHOTCRETE

March 19, 2020

TRW Tip #17 | SHOTCRETE THICKNESS INSPECTION

In tunneling and underground space projects, rapid and massive inspection is one of the main challenges in the construction cycle.

consejo Consejo TRW Consejos GEOCOM Trimble Trimble RealWorks

Consejo TRW N°16 | INSPECCIÓN EN ESPACIOS SUBTERRÁNEOS

March 5, 2020

TRW Tip #16 | UNDERGROUND INSPECTION

In tunnel and underground space projects, rapid and massive inspection is one of the main challenges in the construction cycle.

Consejos GEOCOM Consejos TRW GEOCOM Trimble Trimble RealWorks

Consejo TRW N°15 | Flujo de Trabajo en Espacios Subterráneos

February 20, 2020

TRW Tip #15 | Underground Workflow

Working in underground spaces, such as tunnels or galleries, is one of the most common challenges in engineering and construction. Its complexity level requires the highest possible precision and fidelity, making Trimble RealWorks the ideal tool to take on this challenge.

Consejos GEOCOM Consejos TRW GEOCOM Trimble Trimble RealWorks

CONSEJO TRW N°14 | FLUJO TOPOGRÁFICO: VOLÚMENES Y PERFILES

February 6, 2020

TRW TIP #14 | TOPOGRAPHIC FLOW: VOLUMES AND PROFILES

To maintain qualitative and quantitative control in earthworks, volumetric calculation of the captured surfaces is essential. As is the 2D design of the same using profiles.

1 2 Next