TA Tips

Consejo GEOCOM Consejo TA Consejo Trimble Access Consejos GEOCOM Consejos Trimble Access GEOCOM TA Trimble Trimble Access

Consejo Trimble Access | Levantamiento Continuo

October 29, 2020

TA Tip #20 | Continuous lifting

Continuous topo is a method of automatically acquiring points, either using GNSS or a total station, such that a time and/or distance criterion is met.

Consejo GEOCOM Consejo Trimble Access Consejos Trimble Access GEOCOM TDC600 Trimble Trimble Access

Consejo Trimble Access N°18 | Calibración Local con TDC600

September 28, 2020

TA Tip #18 | Local calibration with TDC600

This Trimble Access Tip explains how to perform this calibration on a TDC600 with Android operating system and how to handle import files in this environment, concluding with the creation of a template

Cinemático Consejo TA Consejo Trimble Access GEOCOM Levantamiento Cinemático TA Trimble Trimble Access

Consejo Trimble Access N° 14 | LEVANTAMIENTO CINEMÁTICO CON TDC600 Y GNSS TRIMBLE R8s

July 20, 2020

TIPS & TRICKS #14 | KINEMATIC SURVEY WITH TDC600 AND TRIMBLE R8s GNSS

This tip shows the communication of the GNSS receiver with the TDC600 Collector, survey style setup, measurement, and data download.

Consejo TA Consejo Trimble Access Consejos GEOCOM GEOCOM Trimble Trimble Access

Consejo TA N°13 | Levantamiento estático con TDC600 y GNSS Trimble R8s

July 1, 2020

TA Tip #13 | Static Surveying with TDC600 and Trimble R8s GNSS

This tip shows the complete observation workflow, from the communication of the GNSS receiver with the TDC600 Collector, survey style setup, measurement, and data download.

Consejo TA Consejo Trimble Access Consejos GEOCOM Controladora GEOCOM Trimble Access

Consejo TA N°12 | Controlador Trimble TDC600

June 18, 2020

TA Tip No. 12 | Trimble TDC600 Controller

The TDC600 is a Trimble controller based on the Android operating system. Along with Trimble Access 2020, it becomes a powerful solution for operating surveying instruments from a renewed perspective by including the traditional functionalities of a smartphone.

Consejo TA Consejos GEOCOM GEOCOM Software de Campo Trimble Trimble Access

Consejo Trimble Access "Replanteo de línea vertical"

May 22, 2020

TA Tip #10 | VERTICAL ALIGNMENT

Trimble Access allows you to stake out elements, such as lines and curves, for example. In this tip, we will stake out a three-dimensional line, in this case a vertical one, which will allow us to verify the verticality of a physical element.

Consejo TA Consejos GEOCOM Consejos TA GEOCOM

April 23, 2020

TA Tip #8 | Local Calibration

GNSS and total station are geodetic observation instruments widely used in the world of land surveying.

Consejo TA Consejos GEOCOM GEOCOM TA Trimble Trimble Access

Consejo TA N°7 | Sincronización de datos | GEOCOM

April 8, 2020

TA Tip #7 | Data Synchronization

Trimble Access allows you to synchronize data from the office to the field and vice versa. Using the Trimble Sync Manager application, manage all necessary information for different survey crews located in various locations.

Consejo TA Consejos GEOCOM GEOCOM Soporte Trimble Trimble Access

Consejo TA N°6 | Cálculo de área y volumen

March 26, 2020

TA Tip #6 | Area and Volume Calculation

Calculating volume and area is a recurring activity after a topographic survey.

Consejo GEOCOM Consejos TA GEOCOM Trimble Access

March 11, 2020

TA Tip #5 | Cycle-based measurement

Use Trimble Access for repeated observation of slope distances, horizontal angles, and vertical angles to obtain precise data for coordinate calculation after network adjustment. Automate the observation through Autolock or Finelock, achieving more accurate results and increasing efficiency.

Consejos GEOCOM Consejos TA GEOCOM Soporte Trimble Trimble Access

Consejo TA N°4 | RTK GNSS POR RADIO UHF CON TRIMBLE R10

February 27, 2020

TA Tip #4 | UHF Radio RTK GNSS with Trimble R10

Discover the revamped Trimble Access 2019.11 with TA Tips. Configure your GNSS receiver using the TSC7 collector.

Consejos GEOCOM Consejos TA GEOCOM Trimble Trimble Access

February 18, 2020

TIP NO. 3 | INTEGRATED SURVEYING

Integrated Surveying is a methodology for positioning and orienting a robotic total station based on GNSS RTK observations.

Consejos GEOCOM Consejos TA GEOCOM Trimble Trimble Access

February 6, 2020

TIP N°2 | TRISECTION

Trilateration, free stationing, or re-section are some of the names given to the operation of setting up a total station in any position and observing known points to obtain their coordinates and orientation. Perform this technique with Trimble Access and check the adjustment residual values in the field to achieve high reliability in the determination.

Consejos GEOCOM Consejos TA GEOCOM Trimble Trimble Access

February 6, 2020

Tip #1 TA | RTK OVER THE INTERNET

Discover the renewed Trimble Access 2019.10 through TA Tips. Explore Trimble Access in the field of a topographic survey using GNSS in RTK mode

Consejo GEOCOM Consejo TA GEOCOM TA Trimble Access

Descargar e instala Trimble Access por GEOCOM

February 5, 2020

Download and install Trimble Access by GEOCOM

In the following tutorial, you will learn about the procedure you need to follow to install Trimble Access on your computer.