consejoConsejo GEOCOMConsejo TAConsejo Trimble AccessConsejos GEOCOMConsejos TAConsejos Trimble AccessTrimbleTrimble Access
TA Tip #21 | Traverse measurement and calculation
This Trimble Access tip describes the field observation technique using Additional Station Setup, traverse calculation using COGO tools, and least squares adjustment in TBC.
Consejo GEOCOMConsejo TAConsejo Trimble AccessConsejos GEOCOMConsejos Trimble AccessGEOCOMTATrimbleTrimble Access
TA Tip #20 | Continuous lifting
Continuous topo is a method of automatically acquiring points, either using GNSS or a total station, such that a time and/or distance criterion is met.
TA Tip #19 | Internal Radio RTK Rover Setup with TDC600 and R8s
Setting up an RTK survey style will allow communication between the receivers and the field controller.
TA Tip #18 | Local calibration with TDC600
This Trimble Access Tip explains how to perform this calibration on a TDC600 with Android operating system and how to handle import files in this environment, concluding with the creation of a template
Consejo GEOCOMConsejo TAConsejo Trimble AccessConsejos GEOCOMConsejos TAEstación totalTrimbleTrimble AccessTrimble SX10
TA Tip #15 | Augmented reality and robotic reimagining with Trimble SX10
Setting out is a procedure used in engineering and construction work. It allows us to position designs on site according to their exact location in space.
TA Tip #5 | Cycle-based measurement
Use Trimble Access for repeated observation of slope distances, horizontal angles, and vertical angles to obtain precise data for coordinate calculation after network adjustment. Automate the observation through Autolock or Finelock, achieving more accurate results and increasing efficiency.
Download and install Trimble Access by GEOCOM
In the following tutorial, you will learn about the procedure you need to follow to install Trimble Access on your computer.