GEOCOM Online Course | Photogrammetric Processing in Metashape

This course is designed to understand the photogrammetric technique from the perspective offered by drones. It also focuses on direct georeferencing, allowing for greater productivity compared to traditional photogrammetric processing.

 LIVE AND RECORDED CLASSES 

 COURSE CONTENT 

 1. INTRODUCTION TO THE PHOTOGRAMMETRIC PROCESS 

OBJECTIVE To learn the basic fundamentals of applied photogrammetry.

CONTENT
- General structure of Metashape
- Pre-processing configuration
- Strategies for aerial triangulation

 2. INDIRECT GEOREFERENCING 

OBJECTIVE To apply control points in the photogrammetric process with the aim of determining the intrinsic parameters of the camera.

CONTENT
- General theory of aerial triangulation
- Intrinsic camera parameters
- Extrinsic camera parameters
- Coordinate system definition
- Importing photographs
- Photo alignment (aerial triangulation)
- Definition and photo-identification of control points
- Camera optimization
- Exporting the calibration file

 3. DIRECT GEOREFERENCING 

OBJECTIVE To apply the determination of camera pose, either complete or incomplete, in a photogrammetric process.

CONTENT
- Coordinate system definition
- Importing photographs
- Importing camera pose
- Importing camera calibration
- Photo alignment (aerial triangulation)

 4. OBTAINING PHOTOGRAMMETRIC PRODUCTS 

OBJECTIVE To obtain orthophotos and point clouds.

CONTENT
- Dense reconstruction (point cloud generation)
- Point cloud classification
- Reconstruction of the surface to be projected
- Orthophoto generation
- Delimitation of the area of interest
- Export to a variety of formats

 SESSION FORMAT 

 1 daily module of 3 hours 

SANTIAGO, CHILE TIME ZONE GMT -4 HOURS

Morning Module | 9:30 - 12:30 hours

 INSTRUCTOR 

REGISTRATION CLOSED

DOWNLOAD BROCHURE

FOR INTERNATIONAL PAYMENTS, CONTACT MADELAINE DROGUETT | MADELAINE.DROGUETT@GEOCOM.CL

No prior knowledge of Metashape is required.